Anchoring & Fixing Systems – Highway Building Materials https://www.highwaybmt.com Construction Chemicals Sun, 15 Feb 2026 18:02:39 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 fischer bolt anchor FWA https://www.highwaybmt.com/product/anchoring-and-fixing-systems/fischer-bolt-anchor-fwa-10-x-95-45793/ Wed, 07 Feb 2024 07:48:35 +0000 https://www.highwaybmt.com/?post_type=product&p=1854 The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means […]

<p>The post fischer bolt anchor FWA first appeared on Highway Building Materials.</p>

]]> The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

  • Economical solution for all applications where an approved fixation is not required.
  • Available in zinc-plated steel and hot-dip galvanised steel.
  • Available with metric and imperial threads.
  • The reduced anchorage depth enables faster installation.

FWA 10 x 115  45794

FWA 10 x 95   45793

<p>The post fischer bolt anchor FWA first appeared on Highway Building Materials.</p>

]]> fischer Expansion plug S 6 50106 https://www.highwaybmt.com/product/anchoring-and-fixing-systems/fischer-expansion-plug-s-6-50106/ Wed, 07 Feb 2024 07:45:30 +0000 https://www.highwaybmt.com/?post_type=product&p=1852 The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion […]

<p>The post fischer Expansion plug S 6 50106 first appeared on Highway Building Materials.</p>

]]> The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry.

  • The rimless plug is suitable for pre-positioned and push-through installation.
  • Simple insertion due to the ease of pushing in the plug.
  • The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation.

<p>The post fischer Expansion plug S 6 50106 first appeared on Highway Building Materials.</p>

]]> fischer bolt anchor FAZ II Plus https://www.highwaybmt.com/product/anchoring-and-fixing-systems/mechanical-anchors/fischer-bolt-anchor-faz-ii-plus/ Wed, 07 Feb 2024 07:02:18 +0000 https://www.highwaybmt.com/?post_type=product&p=1842 The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning […]

<p>The post fischer bolt anchor FAZ II Plus first appeared on Highway Building Materials.</p>

]]> The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity. For example, the steel anchor is ideal for the anchoring of railings, cable trays, and consoles.

  • Quick and easy assembly without the need for drill hole cleaning (M8-M24).
  • Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) – fewer fixing points and smaller anchor plates save time and costs.
  • Millimeter accurate adjustment to the loads due to the variable anchoring depths.
  • Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD.

16/50 ZP BOLT ANCHOR

<p>The post fischer bolt anchor FAZ II Plus first appeared on Highway Building Materials.</p>

]]> Sika AnchorFix 3001 https://www.highwaybmt.com/product/anchoring-and-fixing-systems/chemical-anchoring-systems/sika-anchorfix-3001/ Fri, 19 Jan 2024 11:42:32 +0000 https://www.highwaybmt.com/?post_type=product&p=1669 Sika AnchorFix®-3001 is an epoxy resin based, 2-part, thixotropic, 1:1 mixing ratio, high performance anchoring material. It is specifically designed for anchoring threaded rods and reinforcement bars in both cracked and un-cracked dry or damp concrete. Suitable to use in hot and tropical climatic conditions. Usage Anchoring material for fixing of non-expanding anchors in the […]

<p>The post Sika AnchorFix 3001 first appeared on Highway Building Materials.</p>

]]> Sika AnchorFix®-3001 is an epoxy resin based, 2-part, thixotropic, 1:1 mixing ratio, high performance anchoring material. It is specifically designed for anchoring threaded rods and reinforcement bars in both cracked and un-cracked dry or damp concrete. Suitable to use in hot and tropical climatic conditions.

Usage

Anchoring material for fixing of non-expanding anchors in the following:
Structural work

  • Rebar / steel reinforcement anchoring in new and refurbishment works
  • Threaded rods
  • Bolts and special fastening / fixing systems

Metalwork, carpentry

  • Handrails, balustrades and supports
  • Railings
  • Window and door frames

Substrates

  • Concrete (cracked and un-cracked)
  • Hollow and solid masonry
  • Wood
  • Natural and reconstituted stone
  • Solid rock

Packaging

400ML & 600ML

Colour

Part A  off-white

Part B dark grey / black

A+B mixed  grey

 

 

 

<p>The post Sika AnchorFix 3001 first appeared on Highway Building Materials.</p>

]]> Sika AnchorFix 2 Tropical https://www.highwaybmt.com/product/anchoring-and-fixing-systems/chemical-anchoring-systems/sika-anchorfix-2-tropical/ Fri, 19 Jan 2024 09:07:42 +0000 https://www.highwaybmt.com/?post_type=product&p=1657 Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for tropical / hot climate conditions. Suitable for use in hot and tropical climatic conditions. Usage As a fast curing anchoring adhesive for all grades of: Rebars / reinforcing steel Threaded rods Bolts and special fastening systems Concrete (in cracked and non-cracked) Solid masonry Steel […]

<p>The post Sika AnchorFix 2 Tropical first appeared on Highway Building Materials.</p>

]]> Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for tropical / hot climate conditions. Suitable for use in hot and tropical climatic conditions.

Usage

As a fast curing anchoring adhesive for all grades of:

  • Rebars / reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems
  • Concrete (in cracked and non-cracked)
  • Solid masonry
  • Steel
  • Hard natural stone*
  • Solid rock*

* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-2 Tropical Adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discoloration.

Packaging

300ML

Colour

Component A: White
Component B: Beige
Component A + B mixed: Off white/beige

 

<p>The post Sika AnchorFix 2 Tropical first appeared on Highway Building Materials.</p>

]]>